Sharp MX-4100N Service Manual page 237

46-60
Purpose Adjustment/Setup
Function (Purpose) Used to adjust the sharpness in the color
auto copy mode.
Section
Operation/Procedure
1) Select a target item with [↑] [↓] keys on the touch panel.
2) Input numeric value corresponding to sharpness level (filter
process mode).
3) Press [OK] key.
This is used to adjust the sharpness in the color auto copy mode
and the smoothness (roughness) in the dark area.
Item/Display
A SCREEN FILTER H
LEVEL
L
AUTO
B AUTOMODE SOFT
FILTER LEVEL
CENTER
HIGH
C COLOR COPY : OFF
CMY
ON
D COLOR COPY : K OFF
ON
E SINGLE COLOR : OFF
CMY
ON
F 2 COLOR COPY : OFF
CMY
ON
G 2 COLOR COPY : K OFF
ON
H B/W COPY OFF
ON
I COLOR PUSH : OFF
RGB
ON
J B/W PUSH OFF
ON
Content
Sharpness (filter) adjustment of dot pattern
image in auto copy mode
Sharpness (filter) adjustment for the auto
copy mode
Soft filter applying setting to C, M, Y image
in color copy mode
Soft filter applying setting to K image in color
copy mode
Soft filter applying setting to C, M, Y image
in sigle color copy mode
Setting of YES/NO of applying the soft filter
to C/M/Y images of the 2-color copy mode
Setting of YES/NO of applying the soft filter
to K images of the 2-color copy mode
Soft filter applying setting in monochrome
copy mode
Soft filter applying setting to image in push
scan color mode
Soft filter applying setting to image in push
scan monochrome mode
MX-5001N SIMULATION 6 – 90
Setting
Default value
range
Strong 1 3 (Auto)
emphasis
Soft 2
emphasis
Auto 3
SOFT 1 2 (CENTER)
CENTER 2
HIGH 3
OFF 0 1 (ON)
ON 1
OFF 0 1 (ON)
ON 1
OFF 0 1 (ON)
ON 1
OFF 0 1 (ON)
ON 1
OFF 0 1 (ON)
ON 1
OFF 0 1 (ON)
ON 1
OFF 0 1 (ON)
ON 1
OFF 0 1 (ON)
ON 1
Remarks
Applied to the auto copy
mode only.
Applied to the auto copy
mode only.
When it is set to ON, the
soft filter is applied and the
smoothness in the dark
image area is improved.
(Roughness is reduced.)