Sharp MX-4100N Service Manual page 514

[Q] FAN SECTION MX-5001N
1. Disassembly and assembly
A. Fan motor
f
e
b
a Rear cooling fan motor
b Ozone fan motor
c Power cooling fan motor
d Power cooling fan motor2
e Controller cooling fan motor
f Fusing fan motor
g Process air inlet fan motor
h LSU cooling fan motor
i Cartridge cooling fan motor
(1) Rear cooling fan motor
1) Remove the rear cabinet.
2) Open the control box.
a
h
i
g
d
c
Parts
MX-5001N FAN SECTION Q – 1
3) Service Manual Disconnect the connector and remove the screw, and remove
the duct.
4) Disconnect the connector and remove the screw, and remove
the rear cooling fan motor.
* When installing, put the fan label (A) facing outside, and be
careful of the pulling direction of the harness (B).
B
A
(2) Ozone fan motor
1) Remove the rear cabinet.
2) Open the control box.
3) Remove the filter box unit.