Sharp MX-4100N Service Manual page 174

23
23-2
Purpose Adjustment/Setting/Operation data check
Function (Purpose) Used to output the trouble history list of
paper jam and misfeed. (If the number of
troubles of misfeed is considerably great,
the judgment is made that repair is
required.)
Section
Operation/Procedure
Press [EXECUTE] key to execute print.
The trouble history of paper jams and misfeed is printed.
23-80
Purpose Operation test/check
Function (Purpose) Used to check the operation of paper feed
and paper transport in the paper feed sec-
tion and the paper transport section. Used
to output the list of the operation status of
the sensor and the detectors in the paper
feed section and the paper transport sec-
tion.
Section Paper feed, Paper transport
Operation/Procedure
When [EXECUTE] key is pressed, the timing list of paper feed and
paper transport is outputted.
Used to print the operations timing list of the sensors and detectors
in the paper feed and transport section.
The timing list of paper feed and paper transport operations of the
latest job (copy or print) on the final paper is printed.
Since the paper feed and paper transport routes differ depending
on the used paper feed tray and the print operation mode, the sen-
sor and the detectors and the operation timing also differ.
SECTION
STANDARD
CURRENT (*1)
PREVIOUS (*1)
MAXIMUM (*1)
MINIMUM (*1)
*1: The value without unit on the left side of each item on the list
has no relation to the operation timing. It is not used in the market.
24
24-1
Purpose
Function (Purpose) Used to clear the jam counter, and the trou-
Section
Operation/Procedure
1) Select the item to be cleared with the touch panel key.
2) Press [EXECUTE] key.
3) Press [YES] key.
The target counter is cleared.
MACHINE
SPF
TROUBLE
MX-5001N SIMULATION 6 – 27
Operation content (Trigger name - Detection
operation or load operation name)
Reference value (ms)
Operation timing (ms) of the latest job on the
final paper
Operation timing (ms) of the second latest job
on the final paper
Max. operation timing (ms) of all the jobs
Min. operation timing (ms) of all the jobs
Data clear
ble counter. (After completion of mainte-
nance, clear the counters.)
Machine JAM counter
RSPF/DSPF JAM counter
Trouble counter