Sharp MX-4100N Service Manual page 513
Digital full color multifunctional system
Hide thumbs
Also See for MX-4100N:
- Operation manual (903 pages) ,
- Quick start manual (120 pages) ,
- Software setup manual (44 pages)
Table of Contents
Advertisement
(6) Primary transfer PWB
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the screw, and remove the flywheel.
* Installing sequence: (1)C (2) KM
(Engraved mark for each color)
* After installing, check to confirm that it is not in contact with
the harness.
4)
Remove the screw and disconnect the connector, and remove
the primary transfer PWB.
KM
C
MX-5001N PWB SECTION P – 7
(7) MC PWB
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the screw, and remove the flywheel.
* Installing sequence: (1)C (2) KM
(Engraved mark for each color)
* After installing, check to confirm that it is not in contact with
the harness.
4)
Disconnect the connector, remove the supporter, and remove
the primary transfer PWB unit.
5)
Remove the screw and disconnect the connector, and remove
the MC PWB and the supporter.
KM
C
Advertisement
Table of Contents
