Sharp MX-4100N Service Manual page 271

62-6
Purpose Operation test/check
Function (Purpose) Used to perform the self diagnostics of the
hard disk.
Section
Operation/Procedure
1) Select the self diag area.
2) Press [EXECUTE] key.
The self diag operation is performed.
NOTE:
E7-03 error occurs. If there may be a trouble in the HDD, use this
simulation to cheek the HDD.
SHORT S.T Partial area diag
EXTENDED S.T All area diag
When the operation is completed, [EXECUTE] key returns to the
normal display.
Normal completion → "OK(RESULT:0)" is displayed.
Abnormal end → "NG(RESULT: Other than 0)" is displayed.
* If the simulation cannot be executed or terminated abnormally for
some reason, "ERROR" is displayed on the corresponding sec-
tion.
62-7
Purpose Operation test/check
Function (Purpose) Used to print the hard disk self diagnostics
error log.
Section
Operation/Procedure
1) Press [EXECUTE] key.
ERROR LOG SECTOR of the SMART function is executed, and
the result is printed.
When the operation is completed, [EXECUTE] key returns to the
normal display.
62-8
Purpose
Function (Purpose) Used to format the hard disk. (Excluding
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Used to execute the hard disk format.
When the operation is completed, [EXECUTE] key returns to the
normal display.
* When the HDD formatting (except for the system area) is not
completed normally, "HDD FORMAT (EXCEPT SYSTEM AREA)
NG" is displayed.
62-10
Purpose
Function (Purpose) Used to delete the job log data.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Used to delete the job log data.
When the operation is completed, [EXECUTE] key returns to the
normal display.
62-11
Purpose
Function (Purpose) Used to delete the document filing data.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Used to delete the document filing data.
When the operation is completed, [EXECUTE] key returns to the
normal display.
MX-5001N SIMULATION 6 – 124
the system area and the operation manual
area)
Data clear
Data clear