Sharp MX-4100N Service Manual page 282

67
67-17
Purpose
Function (Purpose) Printer reset
Section Printer
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The set data related to the printer are initialized. (Including the
NIC setting.)
When the operation is completed, [EXECUTE] key returns to the
normal display.
67-24
Purpose Adjustment/Setup
Function (Purpose) Printer color balance adjustment (Auto
adjustment)
Section Printer
Operation/Procedure
1) Press [EXECUTE] key.
The color patch image (adjustment pattern) is printed out.
2) Plate the printed adjustment pattern on the document table,
select [FACTORY] or [SERVICE] mode.
3) Press [EXECUTE] key.
The printer color balance auto adjustment is performed, and
the adjustment result is printed.
4) Press [OK] key.
The half tone correction target registration is processed.
67-25
Purpose
Function (Purpose) Printer color balance adjustment (Manual
Section
Operation/Procedure
1) Select an adjustment target color with [K][C][M][Y] keys on the
touch panel.
2) Select a target adjustment density level with [↑] [↓] key on the
touch panel.
3) Enter the set value with 10-key.
* When the
item can be changed with 1up (1down) collectively.
4) Press [OK] key. (The set value is saved.)
When the adjustment value is increased, the image density is
increased, and vice versa.
When [EXECUTE] key is pressed, the check pattern in printed in
the color balance and density corresponding to the adjustment
value.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
MX-5001N SIMULATION 6 – 135
Adjustment/Setup
adjustment)
Printer
key is pressed, the setting value of each
Item/Display
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
POINT9
POINT10
POINT11
POINT12
POINT13
POINT14
POINT15
POINT16
POINT17
Setting Default
range value
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50