Sharp MX-4100N Service Manual page 506

(5) Paper feed clutch (Paper feed tray 1/
Paper feed tray 2)/Tray vertical transport clutch
1) Remove the paper tray lift-up motor unit.
2) Remove the paper feed motor.
3) Remove the paper feed drive unit.
4) Remove the gear and disconnect the connector.
5) Remove the screw, and remove the drive frame upper unit.
6) Remove the paper feed clutch unit.
* When installing, be careful of wiring process.
7) Remove the E-ring, and remove the paper feed clutch.
8) Remove the belt.
9) Remove the gear, and remove the tray vertical transport clutch
unit.
* When installing, be careful of wiring process.
10) Remove the E-ring, and remove the tray vertical transport
clutch.
MX-5001N DRIVE SECTION O – 6