Sharp MX-4100N Service Manual page 501

: Oct. 24 2008
1
[O] DRIVE SECTION MX-5001N
1. Disassembly and assembly
A. Main drive unit
1
b
c
e
f
a TM drive PWB
b Toner motor
c Developing drive motor (K)
d Developing drive motor (CL)
e Resist motor
f Transfer belt motor
g BK drum motor
1 h C drum motor (50-sheet machine)
i CL drum motor (40-sheet machine) /
M drum motor (50-sheet machine)
j Y drum motor (50-sheet machine)
k Primary transfer separation clutch
l Primary transfer separation reverse rotation clutch
1) Remove the rear cabinet.
2) Remove the screw, and open the control box.
b
b
a
b
d
i
h
l
g k
Parts
MX-5001N DRIVE SECTION O – 1
3) Service Manual Remove the flywheel. (BK: 50-sheet machine only)
1
* Installing sequence: (1)C (2) KM
(Engraved mark for each color)
* After installing, check to confirm that it is not in contact with
the harness.
1
j
4) Disconnect the connector and remove the screw, and remove
the main drive unit.
* Hold section A and remove.
(1) TM drive PWB/Toner motor
1) Remove the rear cabinet.
2) Open the control box.
3) Disconnect the connector and remove the screw, and remove
the TM dive PWB.
A