Sharp MX-4100N Service Manual page 184

26-54
Purpose Setting
Function (Purpose) User auto color calibration (color balance
adjustment) Inhibit/Allow setting
(printer mode)
Section
Operation/Procedure
1) Enter the set value with 10-key.
0 Inhibit
1 Allow (Default)
2) Press [OK] key.
The set value in step 1) is saved.
26-65
Purpose Setting
Function (Purpose) Used to set the finisher alarm mode.
Section
Operation/Procedure
Use the touch key to set.
Set
Item
value
LIMIT 30 Number of sheets of
SHEETS stapling: Max. 30
50 Number of sheets of
stapling: Max. 50
LIMIT ON Number of sets of stapling:
COPIES Max. 50 sets
OFF Number of sets of stapling:
Not Limited
LIMIT 25 Number of sheets of
SHEETS(L) stapling: Max. 25
30 Number of sheets of
stapling: Max. 30
SADDLE ON Number of sets loaded in
COPIES the saddle staple: Limited
(*1)
OFF Number of sets loaded in
the saddle staple: Not
Limited
*1: 1-5 sheets (20 sets) / 6-10 sheets (15 sets)/
10-15 sheets (10 sets)
Setting Default
Content
range value
30 or 50 50
ON or ON
OFF
25 or 30 25
ON or ON
OFF
MX-5001N SIMULATION 6 – 37
26-69
Purpose Setting
Function (Purpose) Used to set the operating conditions for
toner near end.
Section
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
Item/Display
A TONER 0 The toner preparation
PREPARATION message is
(0 : YES 1 : NO) displayed.
1 The toner preparation
message is not
displayed.
B TONER NEAR 0 The toner near end
END message is
(0 : YES 1 : NO) displayed.
1 The toner near end
message is not
displayed.
C TONER END 1 Operation Enable in
TONER END
2 Operation STOP in
TONER END
3 Operation STOP in
TONER END
D TONER END Setting of the number of
COUNT copy/print/FAX outputs
Enable after TONER
NEAR END.
E TONER E-MAIL 0 Condition for Low
ALART status send of E-mail
alert
When the toner
preparation message
is displayed (in near
near toner end)
1 Condition for Low
status send of E-mail
alert
When near toner end
Setting Default
Content
range value
0 - 1
0 - 1
1 - 3
1 - 5
0 - 1
2
1
1