Sharp MX-4100N Service Manual page 461

3) Remove the lock block. Disengage the right door lock pawl.
Remove the ADU cabinet F, and the right door release lever.
1
2
5
4) Remove the ADU cabinet R.
5) Remove the MF harness cover, and disconnect the connector.
1
3
3
4
2
MX-5001N PAPER FEED SECTION F – 6
6) Remove the MF tray installing shaft, and remove the manual
feed tray unit.
7) Disconnect the connector, and remove the manual paper feed
unit.
(1) Temperature and humidity sensor/Manual paper
feed tray paper width detector
1) Remove the manual paper feed tray unit.
2) Remove the MF tray upper inside cover.
3) Disengage the pawl, lift the MF tray upper and MF tray 2, and
disconnect the connector.
1
3
2