Sharp MX-4100N Service Manual page 240

46-90
Purpose Adjustment/Setup
Function (Purpose) Used to adjust the high compression PDF
ASIC.
(Do not change default value in the field)
Section
Operation/Procedure
1) Select a target adjustment mode with [TEXT], [COLOR] and
[BG LAYER] keys.
2) Select a target adjustment item with [↑] [↓] key.
3) Enter the set value with 10-key.
4) Press [OK] key.
The set value is saved.
Item Button Display
A TEXT GLYPH
SENSITIVITY
B BG SW FOR
FINDLINES
C HOR
FINDLINES SW
D VERT
FINDLINES SW
E FGCOLOR
INDEXING SEL
F FGCOLOR
INDEXING ADJ
A COLOR LUMINANCE
ADJUSTMENT
B CHROMA
INTENT
A BG BG LAYER
LAYER INTENT 1
B BG LAYER
INTENT 2
Setting Default
Content
range value
Text handling 0 - 2 0
selection
Line handling 0 - 1 0
selection
Line detection 0 - 2 0
SW (H)
Line detection 0 - 2 0
SW (V)
Text color 0 - 3 0
number
adjustment SW
Text color 0 - 4 2
adjustment
Luminance 0 - 4 2
adjustment
Chroma 0 - 2 1
selection
Speed priority 0 - 2 1
setting
Image quality 0 - 2 1
priority setting
MX-5001N SIMULATION 6 – 93
48
48-1
Purpose Adjustment
Function (Purpose) Used to adjust the scan image magnifica-
tion ratio (in the main scanning direction
and the sub scanning direction).
Section
Operation/Procedure
1) Select a target adjustment item with [↑] [↓] key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value is saved.
When the adjustment value is increased, the image magnification
ratio is increased.
A change of "1" in the adjustment value of item A, C, or E corre-
sponds to a change of about 0.02% in the copy magnification ratio.
A change of "1" in the adjustment value of item B, D, or F corre-
sponds to a change of about 0.1% in the copy magnification ratio.
[RSPF]
Item/Display
A CCD (MAIN) SCAN main scanning
magnification ratio
adjustment (CCD)
B CCD (SUB) SCAN sub scanning
magnification ratio
adjustment (CCD)
C SPF (MAIN) RSPF document front
surface magnification ratio
(Main scan)
D SPF (SUB) RSPF document front
surface magnification ratio
(Sub scan)
E SPFB (MAIN) RSPF document back
surface magnification ratio
(Main scan)
F SPFB (SUB) RSPF document back
surface magnification ratio
(Sub scan)
[DSPF]
Item/Display
A CCD(MAIN) SCAN main scanning
magnification ratio
adjustment (CCD)
B CCD(SUB) SCAN sub scanning
magnification ratio
adjustment (CCD)
C SPF(MAIN) DSPF document front
surface magnification ratio
(Main scan)
D SPF(SUB) DSPF document front
surface magnification ratio
(Sub scan)
E SPFB(MAIN) DSPF document back
surface magnification ratio
(Main scan)
Setting Default
Content
range value
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
Setting Default
Content
range value
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
50
50
50
50
50
50