Sharp MX-4100N Service Manual page 284

67-28
Purpose Adjustment/Setup
Function (Purpose) Used to set the default of the service target
of the printer mode auto color balance
adjustment.
Section Printer
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The service target of the printer mode auto color balance
adjustment is set to the default.
The service color balance target and the color balance target
for the user color balance adjustment are set to the same color
balance as the factory color balance target.
67-31
Purpose Data clear
Function (Purpose) Used to clear the printer calibration value.
Section Printer
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The printer calibration data (Half tone correction data) are
cleared.
(The printer color balance correction is canceled.)
67-33
Purpose
Function (Purpose) Used to change the gamma of the printer
Section
Operation/Procedure
1) Select a target change color with [K] [C] [M] [Y] key on the
touch panel.
2) Select a target screen with [SCREEN] key.
3) Select a target adjustment density level with [↑] [↓] key.
4) Enter the set value with 10-key.
5) Press [OK] key. (The set value is saved.)
When [EXECUTE] key is pressed, the check pattern in printed in
the color balance and density corresponding to the adjustment
value.
Item/Display
A POINT1
B POINT2
C POINT3
D POINT4
E POINT5
F POINT6
G POINT7
H POINT8
I POINT9
J POINT10
K POINT11
L POINT12
M POINT13
N POINT14
O POINT15
P POINT16
Q POINT17
SCREEN1
SCREEN2
SCREEN3
SCREEN4
SCREEN5
SCREEN6
SCREEN7
SCREEN8
SCREEN9
SCREEN10
HEAVY PAPER
MX-5001N SIMULATION 6 – 137
Adjustment/Setup
screen. (for PCL/PS)
Printer
Content
Point 1
Point 2
Point 3
Point 4
Point 5
Point 6
Point 7
Point 8
Point 9
Point 10
Point 11
Point 12
Point 13
Point 14
Point 15
Point 16
Point 17
Display
600dpi 1bit Photo
600dpi 1 bit Graphics
600dpi 4 bit Photo
600dpi 4 bit Graphics
1200dpi 1 bit Photo
1200dpi 1 bit Graphics
B/W 600dpi 1 bit
B/W 600dpi 4 bit
B/W 1200dpi 1 bit
Toner Save B/W
Printer paper kind manual gamma
correction (Heavy paper)
Setting Default
range value
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
0 - 255 128
Content