Sharp MX-4100N Service Manual page 266

(Machine with the DSK installed)
1) Insert the USB memory into the main unit.
2) Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE to EEPROM, SRAM, HDD
<EXPORT>
From EEPROM, SRAM, HDD to USB MEMORY DEVICE
3) Enter the password with 10 key.
4) Press [SET] key.
5) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
<Data list outside the backup targets>
(EEPROM/SRAM)
PWB Type Content
Controller Machine serial No.
Product key information
Various counter
Trouble history
PCU Machine serial No.
Various counter
Machine adjustment execute
history
Trouble history
SCU Various counter
Trouble history
(HDD)
Classifi-
Content
cation
Japanese User dictionary
FEP
Job end list Job end list display data
(The image send series include
the preserved job list.)
Log Job log
New N/A • Print history information
• JAM history information
• Trouble history information
• Same position continuous jam
count value
• Charging information
• Life information
Operation E-manual
manual
56-3
Purpose
Function (Purpose) Used to backup the document filing data to
Section
Operation/Procedure
1)
2)
3)
NOTE
Copy counter/FAX
send counter etc.
Maintenance counter
Maintenance counter
NOTE
56-4
Purpose
Function (Purpose) Used to backup the JOB log data to the
Read from WEB is
Section
enable.
Operation/Procedure
1)
2)
3)
MX-5001N SIMULATION 6 – 119
Data backup
the USB memory.
Insert the USB memory into the main unit.
Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE To EEPROM, SRAM, HDD
<EXPORT>
From EEPROM, SRAM, HDD To USB MEMORY DEVICE
Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
Data backup
USB memory.
Insert the USB memory into the main unit.
Press [JOB LOG EXPORT] key.
Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.