Sharp MX-4100N Service Manual page 201

: Oct. 24 2008
1
<Code descriptions>
TH_UM Fusing upper thermister main center
TH_LM Fusing lower thermister main
TH_E Fusing thermister external
<List of destination groups>
Group 1 Japan
Group 2 U.S.A.
Group 3 Europe
NOTE: When the destination is changed with SIM26-6 after changing this set value, the set values of the destination link items are reset to the default.
43-21
Purpose Adjustment/Setup
Function (Purpose) Used to set the environment correction
under high temperature and high humidity
(H/H) for the fusing temperature setting
(SIM 43-1) in each paper mode.
Section
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
[41-sheet machine]
1
Item/Display
A HL_UM READY HH
B HL_LM READY HH
C HL_E READY HH
D HL_UM PLAIN BW HH
E HL_LM PLAIN BW HH
F HL_E PLAIN BW HH
G HL_UM PLAIN CL HH
H HL_LM PLAIN CL HH
I HL_E PLAIN CL HH
J WARMUP FUMON HL_E T HH
K WARMUP FUMOFF T HH
L WARMUP END TIME HH
M HL_UM HEAVY HH
HL_UM
HL_LM
HL_E
China
Canada
U.K.
Content
Correction value for TH_UM set value in Ready standby
under HH environment
Correction value for TH_LM set value in Ready standby
under HH environment
Correction value for TH_E set value in Ready standby
under HH environment
Correction value for Black-White plain paper TH_UM set
value under HH environment
Correction value for Black-White plain paper TH_LM set
value under HH environment
Correction value for Black-White plain paper TH_E set
value under HH environment
Correction value for Color plain paper TH_UM set value
under HH environment
Correction value for Color plain paper TH_LM set value
under HH environment
Correction value for Color plain paper TH_E set value
under HH environment
Correction value for fusing motor pre-rotation start TH_E
set value under HH environment
Fusing motor prior rotation completion time under HH
environment
Correction value for warm-up complete time under HH
environment
Correction value for heavy paper TH_UM set value under
HH environment
MX-5001N SIMULATION 6 – 54
Heater lamp upper main
Heater lamp lower main
Heater lamp external
AB_B
Inch
AUS AB_A
Correction value: -49 - +49, 1 Count = 1°C Change
Correction -49 -25
value
Input value 1 25
Setting
range
Group 1
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
-5 0 5 25
45 50 55 75
Default value Destination
linkage
Group 2 Group 3
(NOTE)
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
49
99
–
–
–
–