Sharp MX-4100N Service Manual page 209

<Code descriptions>
TH_UM Fusing upper thermister main center
TH_LM Fusing lower thermister main
TH_E Fusing thermister external
43-31
Purpose Adjustment/Setup
Function (Purpose) Used to check the operation of the fusing
web cleaning motor.
Section Fusing
Operation/Procedure
1) Press [EXECUTE] key.
Perform the fusing web cleaning motor drive.
2) When driving the fusing web cleaning motor is completed,
"COMPLETE" is displayed.
Fusing web unit Operation
installation detection
state
Fusing web unit Not operate
installed
Fusing web unit not 10sec continuous
installed rotation
* The fusing web unit is used by installing to the fusing unit. For
checking the fusing web cleaning motor rotation, remove the
whole fusing unit and check with the door open.
HL_UM Heater lamp upper main
HL_LM Heater lamp lower main
HL_E Heater lamp external
Remark
* During this operation,
the fusing web cleaning
feed counter is not
counted up.
MX-5001N SIMULATION 6 – 62
43-32
Purpose Adjustment/Setup
Function (Purpose) Used to set various items related to the
forcible operation of web cleaning when job
end.
Section Fusing
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
Item Display
A JOB END Fusing web
COMP ACT motor forcible
CHECK operation
condition when
job end
B JOB END The fusing web motor is
COMP ACT forcibly operated when job
INTERVAL end.
Print quantity interval
C JOB END Number of forcible
COMP ACT operations of the fusing
CNT web motor when job end
Setting Default
Item
range value
Enable 0 - 1 0 1
Disable 1
1 - 200 100
1 - 5 1