Sharp MX-4100N Service Manual page 204

: Oct. 24 2008
1
Item/Display
1
AJ HL_UM WARMUP_120H HH
AK HL_LM WARMUP_120H HH
AL HL_E WARMUP_120H HH
AM HI_WU_TIME_HH
AN HI_WU_FM_ON_TMP_HH
AO HI_WU_END_TIME_HH
AP HI_WU_JOB_SET_TMP_HH
AQ HI_WARMUP_BORDER_HH
AR LO_WU_JOB_SET_TMP_HH
AS ROT_TIME_AFTER_JOB_HH
* Item L: 1 Count = 1s Change
Correction value for the other items: 1 count for 1°C change
<Code descriptions>
TH_UM Fusing upper thermister main center
TH_LM Fusing lower thermister main
TH_E Fusing thermister external
<List of destination groups>
Group 1 Japan
Group 2 U.S.A.
Group 3 Europe
NOTE: When the destination is changed with SIM26-6 after changing this set value, the set values of the destination link items are reset to the default.
43-22
Purpose Adjustment/Setup
Function (Purpose) Used to set the environment correction
under low temperature and low humidity (L/
L) for the fusing temperature setting (SIM
43-4) in each paper mode.
Section
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
Content
Correction value for TH_UM set value in WarmUp at 120°C
or above under HH environment
Correction value for TH_LM set value in WarmUp at 120°C
or above under HH environment
Correction value for TH_E set value in WarmUp at 120°C or
above under HH environment
Correction value for AJ-AL applying time (timer from Ready
complete) under HH environment
Correction value for FM prior rotation start TH_E in WarmUp
at alpha °C or above under HH environment
Correction value for WarmUp completion time in WarmUp at
alpha °C or above under HH environment
Correction value for Job Enable TH_UM temperature in
WarmUp at alpha °C or above under HH environment
Correction value for the threshold value alpha applying
SIM43-1-AN - AP under HH environment
Correction value for Job Enable TH_UM temperature in
WarmUp at alpha °C or below under HH environment
Correction value for the after rotation time when completing
a job under HH environment
HL_UM
HL_LM
HL_E
China
Canada
U.K.
MX-5001N SIMULATION 6 – 57
Setting
range
Group 1
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
Heater lamp upper main
Heater lamp lower main
Heater lamp external
AB_B
Inch
AUS AB_A
Correction value: -49 - +49, 1 Count = 1°C Change
Correction -49 -25
value
Input value 1 25
Default value Destination
linkage
Group 2 Group 3
(NOTE)
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
50 50 50
-5 0 5 25
45 50 55 75
–
–
–
–
–
–
–
–
–
–
49
99