Sharp MX-4100N Service Manual page 495

Signal name
ADUGS ADU gate solenoid
ADUM-H ADU motor upper
ADUM-L ADU motor lower
APPD1 ADU transport path detection 1
APPD2 ADU transport path detection 2
DSW_ADU ADU transport open/close detection
POD3 Right tray paper exit detection
TFD3 Detects the right tray paper exit full.
No. Name
1 Transport roller 10 (Drive)
2 Transport roller 11 (Drive)
3 Paper exit roller 2 (Drive)
4 Right paper exit gate
5 Transport roller 13 (Drive)
Name
Controls the ADU gate.
Drive the transport roller 13.
Drives the right door section.
Detects paper pass in the upstream of the duplex (ADU).
Detects paper pass in the midstream of the duplex (ADU).
Duplex (ADU) cover open/close detection
Detects the paper exit into the right tray.
Detects the right tray paper exit full.
Transports the paper transported from the transport roller 13 to the transport roller 11.
Transports the paper transported from the transport roller 10 to the transport roller 12.
Used to discharge paper.
Selects the paper path to transport paper to the duplex (ADU) section or to discharge paper to
the right tray.
Transports paper from the paper exit roller 1 to the paper exit roller 2. Transports paper to the
duplex (ADU) section.
MX-5001N DUPLEX/PAPER EXIT SECTION N – 2
Function/Operation
Function/Operation