Sharp MX-4100N Service Manual page 210

44
44-1
Purpose Setting
Function (Purpose) Used to set each correction operation func-
tion in the image forming (process) section.
Section Image process (Photoconductor/Develop-
ing/Transfer/Cleaning)
Operation/Procedure
1) Select an item to be set with the touch panel.
(The selected item is highlighted.)
2) Press [EXECUTE] key. (The set value is saved.)
NOTE: Set the items to the default values unless a change is spe-
cially required.
Item/Display Content
HV Normal operation high
density process control
Enable/Disable setting
HT Normal operation half
tone process control
Enable/Disable setting
TC Transfer output
correction
Enable/Disable setting
MD VG Membrane decrease
grid voltage correction
Enable/Disable setting
MD LD Membrane laser power
voltage correction
Enable/Disable setting
MD EV Membrane decrease
environment grid
voltage correction
Enable/Disable setting
MD DL Membrane decrease
discharge light quantity
correction
Enable/Disable setting
MD DL EV Membrane decrease
environment discharge
light quantity
correction
Enable/Disable setting
TN_HUM Toner density humidity
correction
Enable/Disable setting
TN_AREA Toner density area
correction
Enable/Disable setting
TN_LIFE Toner density life
correction
Enable/Disable setting
TN_COV Toner density print
ratio correction
Enable/Disable setting
TN_PROCON Toner density process
control correction
Enable/Disable setting
TN_ENV Toner density
environment correction
Enable/Disable setting
TN_DRIP Toner density
correction
unconditional supply
Enable/Disable setting
TN_SPEND Toner forcible
consumption mode
Enable/Disable setting
Setting Default
NOTE
range value
Normal Enable
(Disable
: 1 : NO)
Reverse
Enable
(Enable :
0 : YES)
Enable
Enable
Disable
Enable
Enable
Disable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Disable
MX-5001N SIMULATION 6 – 63
Item/Display Content
PHT 1pixel half tone
process control
correction
Enable/Disable setting
AR_AUTO Auto registration
adjustment
Enable/Disable setting
AR_ERROR Auto registration
adjustment execution
error check
Enable/Disable setting
DM_PHASE Drum phase fitting
Enable/Disable setting
SENSITIVITY Toner density
correction
Enable/Disable setting
PRT_HT Half tone process
control printer
correction feedback
Enable/Disable setting
PTC_ENV PTC environment
correction
Enable/Disable setting
PTC_LIFE PTC life correction
Enable/Disable setting
44-2
Purpose Adjustment/Setup
Function (Purpose) Used to adjust the sensitivity of the image
density sensor (registration sensor).
Section Process
Operation/Procedure
When [EXECUTE] key is pressed, the adjustment is executed auto-
matically.
After completion of the adjustment, the adjustment result is dis-
played.
If the adjustment is not executed normally, "ERROR" is displayed.
Item/Display
A PCS_CL LED ADJ Color sensor light
emitting quantity
adjustment value
B PCS_K LED ADJ Black sensor light
emitting quantity
adjustment value
C PCS_CL DARK Dark voltage of color
D PCS_K DARK Dark voltage of black
E PCS_K GRND Belt substrate when
the item B
adjustment is
completed.
F PCS_K BELT MAX Belt substrate input
max. value
Setting Default
NOTE
range value
Normal Disable
(Disable
: 1 : NO)
Reverse
(Enable :
Enable
0 : YES)
Enable
Enable
Disable
Enable
Enable Enable:
Correc-
tion ON
Enable Enable:
Correc-
tion ON
Setting Default
Content
range value
1 - 255 21
1 - 255 21
0 - 255 0
0 - 255 0
0 - 255 0
0 - 255 0