Sharp MX-4100N Service Manual page 188

27-6
Purpose Setting
Function (Purpose) Used to set of the manual service call.
(FSS function)
Section
Operation/Procedure
1) Enter the set value with 10-key.
0 Allow (Default)
1 Inhibit
2) Press [OK] key.
The set value in step 1) is saved.
27-7
Purpose Setting
Function (Purpose) Used to set of the enable, alert callout.
(FSS function)
Section
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
A FSS 0
FUNCTION
1
B ALERT 0
1
*1 The FSS function setting can be changed only from Disable to
Enable. (Cannot be changed from Enable to Disable.)
*2 Alert send timing
No alert cause Initial state / Trouble / Continuous JAM alert
Maintenance When the maintenance timing is reached.
Service call When pressing Service call.
Toner send request When the toner order automatic send setting is
reached.
Toner collection request Revision of the toner installation date (only for
a new product)
Alert resend
FSS function enable
FSS function disable (*1) (Default)
Alert call enable (*2) (Default)
Alert call disable
MX-5001N SIMULATION 6 – 41
27-9
Purpose Setting
Function (Purpose) Used to set the paper transport time record-
ing YES/NO threshold value and shading
gain adjustment retry number.
(FSS function)
Section
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
A FEED TIME 1
B FEED TIME 2
C GAIN 0 - 20
ADJUSTMENT
RETRY
D JAM ALERT
* Items A, B: 0%, standard passing time between sheets of paper;
100%, time for judgment as a jam between sheets of paper.
* Item C: Because of a trouble in shading operation, the number of
retry is actually not registered.
0 - Threshold value of the paper
100 transport time between sensors
(Main unit) (50: Default)
0 - Threshold value of the paper
100 transport time between sensors
(RSPF) (50: Default)
Threshold value of the gain
adjustment retry number
(11: Default)
1 - Alert judgment threshold value
100 for occurrence of continuous
jams
Alert judgment threshold value
for occurrence of continuous
jams (Setting of the number of
times of continuous jams as the
alert for continuous jams)
(Default: 10 times)