Sharp MX-4100N Service Manual page 275

63-8
Purpose Adjustment/Setup
Function (Purpose) Used to set the default of the service target
of the copy mode auto color balance adjust-
ment.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The service target of the copy mode automatic color balance
adjustment is set to the default.
The service color balance target and the color balance target
for the user color balance adjustment are set to the same color
balance as the factory color balance target.
63-11
Purpose Adjustment/Setup
Function (Purpose) Used to set the target color balance of the
copy mode auto color balance adjustment.
Section
Operation/Procedure
1) Select the target color balance with the touch panel.
Item/Display
Target color
balance
64
64-1
Purpose
Function (Purpose) Test print. (Self print) (Color mode)
Section
Operation/Procedure
1) Set the print conditions.
Select an item to be print condition with [↑] [↓] keys.
Set the print conditions with 10 key.
Select a target print color with [K] [C] [M] [Y] key.
2) Press [EXECUTE] key.
The test print (self print) is performed.
MX-5001N SIMULATION 6 – 128
Content
DEF1 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to
Magenta. When this target is
selected, the color balance is
converted into natural gray color
balance by the color table in an actual
copy mode and print is made.
DEF2 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to natural
gray color balance. When this target
is selected, the color balance is
slightly shifted to Cyan by the color
table in an actual copy mode and
print is made.
DEF3 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to Cyan.
When this target is selected, the color
balance is converted into the color
balance with enhanced Cyan by the
color table in an actual copy mode
and print is made.
Operation test/check
Default
value
DEF 1