Sharp MX-4100N Service Manual page 289

Judgment
Kind of trouble
block
General PCU color PCU
system trouble
Process control trouble
(PCU detection)
PCU section error
Connection trouble (SCU SCU
detection)
SCU color system
troubles (SCU detection)
Anti copy system
EEPROM faction
Scanner section troubles
(mirror motor, lens, copy
lamp)
CCD troubles
(shading, etc.)
RSPF/DF trouble
General troubles in the
SPF back surface
scanning section
: Operation enabled, : Operation disabled
3 : When detected during other than a job, the operation is enabled with a tray other than the trouble tray.
4 : When detected during other than a job, the operation is enabled in a section other than the trouble paper exit section.
6 : When detected during other than a job, the operation is enabled in the OC mode.
9 : When detected during other than a job, the operation is enabled in the black and white mode.
* 10 : Since communication is enabled, reception can be transferred.
11 : When detected during other than a job, the operation is enabled in other than the DESK.
* 11 : When the color mode is inhibited in "Color mode inhibit" setting of the system setting, the operation is performed in the monochrome
mode.
* 12 : Trouble display is message of 2 lines. (Example: Ready to copy. F2 trouble)
* 16 : Print is enabled. Displays "Call for service. CODE: **-**".
* Trouble mode process
• Machine operation enabled under some conditions.
A dialog is displayed when a trouble occurs. For the mode where operations are enabled, [OK] button is added to the message. When oper-
ations are disabled, [OK] button is not displayed, and the message is displayed until the trouble is cancelled.
* For 3, 6 perform the following procedures.
• When a trouble is detected during a job, the machine operation is terminated. (Trouble display/without [OK] key)
• When trouble is detected other than during the JOB operating, the trouble display is not made and the JOB that relates to the trouble part
cannot be selected.
• Troubles which disable the machine operations
The trouble display is always made.
* Writing to the trouble memory
Writing of a same trouble to the trouble memory can be selected with SIM 26-35.
(Sim.26-35)
0: ONCE; If same as the previous one, it is not saved. (Default)
1: ANY; Though same as the previous one, it is saved.
Copy scan
Trouble code
(including
interruption)
E7 (21 - 23),
F2 (23 - 25, 41 - 43, *11
65 - 67, 71 - 73,
75 - 77)
F2
(22, 23, 24, 25, 39, 58) *12
C4 (10)
*16
A0 (22)
UC (02) 9
UC (20)
U2 (80, 81)
L1,L3
E7 (10, 11, 14)
U5 6
E6 (10, 11, 14)
MX-5001N SELF DIAG AND TROUBLE CODE 7 – 3
Operatable mode
Scan Scan ScanTo FAX
push pull HDD Send
*11 *11 *11
*16 *16 *16 *16
9 9 9 9
6 6 6 6
FAST
FAX List Notifica-
Print
print print tion to
host
*11
*16 *16 *16 *16