Sharp MX-4100N Service Manual page 214

44-12
Purpose Operation data display
Function (Purpose) Used to display the operation data of the
high density process control and the image
density sensor (registration sensor).
Section Image process (Photoconductor/Develop-
ing)
Operation/Procedure
Select a display mode with [TARGET] [PATCH] keys.
Mode Item/Display
TARGET CARB DATA Calibration plate
(1 page) detection level
SEAL ADJ Jig patch seal
DATA detection level when
executing SIM 44-13
ADK_SL (K) Development
characteristics
gradient coefficient
(High density process
control operation)
ADK_INT(K) Development
characteristics
intercept level (High
density process
control operation 0V)
TARGET (K) High density process
control target density
level (K)
TARGET High density process
(C/M/Y) control target density
level (C/M/Y)
PATCH n-1 High density process
1-5 control nth time patch
(Page 1-2) density level 1 (n=1-
5)
n-2 Patch data nth time
patch 2 (n=1-5)
n-3 Patch data nth time
patch 3 (n=1-5)
n-4 Patch data nth time
patch 4 (n=1-5)
• BK only
n-5 Patch data nth time
patch 5 (n=1-5)
• BK only
PATCH n-1 Patch data nth time
6-10 patch 1 (n=6-10)
(Page 1-2)
n-2 Patch data nth time
patch 2 (n=6-10)
n-3 Patch data nth time
patch 3 (n=6-10)
n-4 Patch data nth time
patch 4 (n=6-10)
• BK only
n-5 Patch data nth time
patch 5 (n=6-10)
• BK only
Display Default
Content
range value
0 - 255 108
1 - 255 108
-9.99 - 0
9.99
-999.9 - 0
999.9
0.00 - 0
255.00
0.00 - 0
255.00
0 - 255 0
0 - 255 0
0 - 255 0
0 - 255 0
0 - 255 0
0 - 255 0
0 - 255 0
0 - 255 0
0 - 255 0
0 - 255 0
MX-5001N SIMULATION 6 – 67
44-13
Purpose Adjustment/Setup
Function (Purpose) Used to perform the color image sensor
(image registration sensor F) calibration.
Section
Operation/Procedure
1) Attach the calibration jig.
2) Press [EXECUTE] key.
Calibration is performed, and the data are displayed.
Item/Display
A PCS_CL CARB OUT Calibration plate
sensor value
B PCS_CL LED ADJ Color sensor light
emitting quantity
adjustment value
44-14
Purpose Operation data display
Function (Purpose) Used to display the output level of the tem-
perature and humidity sensor.
Section Process (OPC drum, development)/Fusing/
LSU
Operation/Procedure
The output levels of the fusing temperature sensor, the machine
temperature sensor, and the humidity sensor are displayed.
Item/Display Content
TH_UM Fusing upper thermister main
detection temperature (°C)
Difference AD input value (AD
value)
TH_UM_AD1 Fusing upper thermister main
compensation temperature (°C)
AD value (AD value)
TH_UM_AD2 Fusing upper thermister main
detection sensor AD value (AD
value)
TH_LM Fusing lower thermister main A/D
value (temperature °C)
TH_E Fusing external thermistor A/D
value (temperature °C)
TEMPRATURE Temperature thermister
HUMIDITY Humidity sensor
TH1_LSU LSU thermister 1 A/D value
(temperature °C)
Setting Default
Content
range value
1 - 255 108
1 - 255 21
Display range
Temperature:
0 - 255°C(±1°C)
AD value: 0-1023
Temperature:
0.0-255.0°C
(±0.2°C)
AD value: 0-1023
AD value:0-1023
Temperature:
0 - 255°C(±1°C)
AD value: 0-1023
Temperature:
0 - 255°C(±1°C)
AD value: 0-1023
Temperature:
-40.0 - 60.0°C
(±0.1°C)
AD value: 0-1023
Humidity:
5.0-90.0% (±0.1%),
AD value: 0-1023
Temperature:
5.0-60.0°C
(±0.1°C)
AD value: 0-255