Sharp MX-4100N Service Manual page 193

: Oct. 24 2008
1
41-2
Purpose Adjustment
Function (Purpose) Used to adjust the document size sensor
detection level.
Section
Operation/Procedure
1) Open the document cover, and press [EXECUTE] key without
place a document on the document table.
The sensor level without document is recognized.
2) Set A3 (11" x 17") paper on the document table, and press
[EXECUTE] key.
The sensor level when detecting the document is displayed.
When the above operation is normally completed, it is displayed.
43
43-1
Purpose Setting
Function (Purpose) Used to set the fusing temperature in each
mode.
Section
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
[41-sheet machine]
1
Item/Display
A HL_UM READY
B HL_LM READY
C HL_E READY
D HL_UM PLAIN PAPER BW
E HL_LM PLAIN PAPER BW
F HL_E PLAIN PAPER BW
G HL_UM PLAIN PAPER CL
H HL_LM PLAIN PAPER CL
I HL_E PLAIN PAPER CL
J WARMUP FUMON HL_E T
K WARMUP FUMOFF HL_LM T
L WARM UP END TIME
Content
Ready standby TH_UM set value
Ready standby TH_LM set value
Ready standby TH_E set value
Black-White plain paper TH_UM set value
Black-White plain paper TH_LM set value
Black-White plain paper TH_E set value
Color plain paper TH_UM set value
Color plain paper TH_LM set value
Color plain paper TH_E set value
Fusing motor pre-rotation start TH_E set
value
Fusing motor pre-rotation end TH_LM set
value
Warm-up complete time
MX-5001N SIMULATION 6 – 46
41-3
Purpose Operation test/check
Function (Purpose) Used to check the operations of the docu-
ment size sensor and the control circuit.
Section
Operation/Procedure
The detection output level (A/D value) of OCSW and the document
sensor (PD1 - PD7) is displayed in real time.
The light receiving range of PD1 - PD7 is 1 - 255. (Default: 128)
Item/Display Content
OCSW Original cover SW
PD1 Document detection 1
PD2 Document detection 2
PD3 Document detection 3
PD4 Document detection 4
PD5 Document detection 5
PD6 Document detection 6
PD7 Document detection 7
Default value
Setting
Group 1 Group 2
range
SW-A SW-B SW-A
70 - 230 170 180 175
30 - 200 100 115 110
70 - 230 170 185 175
70 - 230 175 180 175
30 - 200 105 130 120
70 - 230 225 225 225
70 - 230 175 180 175
30 - 200 110 130 120
70 - 230 225 225 225
30 - 200 150 150 150
30 - 200 30 30 30
30 - 255 115 180 115
Detection level range
0-1 ("1" to Close)
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
Destination
Group 3 linkage
(NOTE)
SW-B SW-A SW-B
180 175 180
115 110 115
185 185 185
180 180 185
130 130 130
225 225 225
180 180 185
130 130 130
225 225 225
150 150 150
30 30 30
180 115 180