Sharp MX-4100N Service Manual page 498

b. Manual paper feed clutch
1) Remove the right door.
2) Remove the connector cover and the ADU inner cover.
3) Remove the ADU cabinet R.
4) Remove the MF drive connection plate. Disconnect the con-
nector. Remove the manual paper feed clutch unit.
5) Remove the manual paper feed clutch.
c. Right paper exit gate
1) Open the right door.
2) Remove the connector cover ADU inner cover.
3) Remove the ADU cabinet R.
4) Remove the ADU cabinet F.
5) Remove the lock block, and disengage the right door lock
pawl. Remove the right door release lever.
6) Remove the E-ring, and the ADU gate.
1
2
2
MX-5001N DUPLEX/PAPER EXIT SECTION N – 5
d. ADU gate solenoid
1) Open the right door.
2) Remove the connector cover ADU inner cover.
3) Disconnect the connector, and remove the ADU gate solenoid
unit.
Remove the ADU gate solenoid.
3
1
(2) Others
a. ADU motor lower
1) Remove the rear cabinet.
2) Open the control box.
3) Disconnect the connector, and remove the ADU motor lower.
2