Replacing The Fasten Strip - ABB OmniCore E10 Product Manual

5 Repair

5.4.3 Replacing the fasten strip

5.4.3 Replacing the fasten strip
Location
The illustration shows the location of the fasten strip on the FlexPendant.
xx1900000771
Required spare parts
Spare part
Fasten strip
Replacing the fasten strip
1
2
3
4
164
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
Action
Open the velcro on the fasten strip.
Take the fasten strip out from the holes.
Insert the new fasten strip into the holes
one by one.
Secure the velcro in a suitable length.
© Copyright 2019-2022 ABB. All rights reserved.
Article number Note
3HAC065419-001
Note/Illustration
Product manual - OmniCore E10
3HAC079399-001 Revision: C