Äloading A Still Image; Loading A Still Image From A Storage - Roland VR-6HD Reference Manual

Loading a Still Image
You can load a still image, and output it in the same way as video (p. 26) or use it as a source for DSK compositing (p. 35). There are two ways to load a
still image: you can load from storage media (either an SD card or a USB flash drive), or you can capture the image from the input video.
You can save up to sixteen still images in the unit.
* When still images are saved in the unit, startup takes longer time according to image size and the number of still images saved.

Loading a Still Image from a Storage

Here's how to load a still image from a storage into the unit.
1 .
Save the still image in the root directory of the SD card or
USB flash drive.
2 .
Insert the SD card into the SDXC card slot.
* When using a USB flash drive, connect the USB flash drive to the USB
HOST port.
Ó
3 .
[MENU] button "STILL IMAGE"
STORAGE", and press the [VALUE] knob.
4 .
Touch the screen to select the load destination memory
(STILL 1–16) for the still image.
A list of the still images in the storage is shown.
* Use the "SD CARD" or "USB MEMORY" selector at the top of the screen
to switch between the storage media to load from.
5 .
Touch the filename of the still image you want to load.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
6 .
Use the [VALUE] knob to select "OK", and then press the
[VALUE] knob.
The still image is loaded into the unit. When the operation is finished,
the message "COMPLETED" appears.
Ó
select "LOAD FROM
7 .
Press the [MENU] button to close the menu.
MEMO
You can set the method of saving still images to "temporarily save".
When you turn off the power, the loaded still image is deleted.
Ó
From the [MENU] button
STORAGE" to "DISABLE", and then load the still image.
NOTE
¹ The still image is scaled to the output format size.
¹ When using a SD card or USB flash drive for the first time, you
must format it using the VR-6HD (p. 13).
¹ Never turn off the power or remove the SD card or USB flash drive
while the message "PROCESSING... " is shown.
¹ Depending on the SD card or USB flash drive, it may take some
time to be recognized.
Formats supported for importing
Bitmap file (.bmp), 24-bit color, uncompressed
PNG file (.png), 24-bit color
Format
* Alpha channel supported
JPEG file (.jpg, .jpeg), 24-bit color
Resolution In conformity with system format (p. 14)
No more than 64 single-byte alphanumeric characters
File name
The extension ".bmp", ".png", ".jpg", or ".jpeg" must be
added.
Video Operations
"STILL IMAGE", set "SAVE TO INTERNAL
25