Playback From A Usb Flash Drive; Backing Up All Data In The M-5000; Saving A Project File To A Usb Flash Drive - Roland M-5000 Quick Start Manual

3.
Select the output bus for recording.
4.
Go to the recorder section on the top panel and press the
[ t ] button.
Recording on the selected output bus starts.
5.
Go to the recorder section on the top panel and press the
[ q ] button.
Recording stops.

Playback from a USB Flash Drive

1.
Go to the recorder section on the top panel and press the
[DISP] button.
The RECORDER window appears.
2.
Tap <PLAYBACK>.
The DESTINATION popover appears.
3.
Select the input channel to receive the playback output.
4.
Go to the recorder section on the top panel and press the
[ p ] button.
The WAV file is played back.
5.
Go to the recorder section on the top panel and press the
[ q ] button.
Playback stops.

Backing Up All Data in the M-5000

The data in the M-5000 is saved as a project file.
You back up the data in the M-5000 by saving the project file to a
USB flash drive.

Saving a Project File to a USB Flash Drive

1.
Press the [MENU] button.
2.
At the MENU window, tap <SETUP>, then tap <PROJECT>.
The PROJECT window appears.
3.
Move to the folder where you want to save the file.
Moves one level below the current folder.
Creates a new folder at the current level.
Moves up one level.
4.
Tap <SAVE>.
A window for specifying the file name is displayed.
5.
Specify the file name, then tap <SAVE>.
The project file is saved to the USB flash drive.
Overview of Operations
59