Editing the notes, performance data and motions
Editing the notes, performance data and
motions
What is a sequencer?
A system for using a sound generator to play notes (pitches and note lengths) at a certain timing based on a specified set of
performance data (a "sequence") is called a "sequencer".
With the S-1 sequencer, you can handle the following performance data in units of playing time called "steps".
●
Note pitch (note number)
●
How hard a note is played (velocity)
●
Note length (gate time)
●
The probability for notes to play back (probability)
●
Playing notes in repeated succession (sub steps)
●
Changes to tone parameters (motions)
The S-1 offers different ways of inputting this data into the sequencer to match your needs.
Methods of input using the sequencer
[ø]
(PLAY)
Type
button
(lit: ○
unlit: -)
○/–
A. Inputting
with the step
pads(P.34)
–
B. Editing with
the keyboard
pads
(chord)(P.36)
–
C. Editing a
step(P.38)
32
[ó]
[STEP]
(REC)
button
Display
button
(lit: ○
indication
(lit: ○
unlit: -)
unlit: -)
–
Tempo
○
–
St.
○
(number)
St.
○
○
(number)
[1]–[16] pads
Step pads
●
Inputs/deletes a note
(C5) into or from the
step corresponding to
the pad you pressed
●
Hold down the pad to
display the note
number of the
inputted note
●
Press [D-MOTION]
button while holding
down a pad to switch
between notes and
sub steps, in order
Keyboard pads (white)
●
Input/delete multiple
notes into the step
indicated
●
Hold down a pad Ó
show the inputted
velocity (Ver. 1.02)
●
Press the [D-MOTION]
button while holding
down a pad Ó switch
between velocity and
gate (Ver. 1.02)
Step pads
●
Go to the step
corresponding to the
pad you pressed
●
Hold down the pad to
display the note
Delete all
Delete all
notes
motions
Input
Pad [11]
Pad [12]
motion
(CLEAR
(CLEAR
NOTE)
MOTION)
All notes
Steps
All motions
in a
specified
in a pattern
pattern
with the
step pads
All notes
Selected
All motions
in the
step
in the
selected
selected
step
step
All notes
Selected
All motions
in the
step
in the
selected
selected
step
step