Other Functions; Äsaving The Unit's Settings On A Usb Flash Drive - Roland VR-400UHD Reference Manual

Other functions

Saving the unit's settings on a USB flash drive
You can group the unit's settings together into a single file (.dat), and save the file to a USB flash drive connected to the USB HOST 2 port. You can
access the saved setting file on the USB flash drive and load it into the unit for use when needed.
NOTE
¹ When using a USB flash drive for the first time, you must
format it using the VR-400UHD (p. 27).
¹ Never turn off the power or remove the USB flash drive while
the message "Processing. " is shown.
¹ Depending on the USB flash drive, recognition of the flash
drive might take some time.
Saving a new file
1.
Connect a USB flash drive to the USB HOST 2 port.
2.
From the [SETUP] button
Settings to USB Memory, touch <Save>.
The File Save window appears.
3.
Touch the <filename> input box in "Save As".
This brings up the touch keyboard.
4.
Use the touch keyboard to enter a filename.
¹
Valid characters: alphanumeric characters, underscore
¹
Filename length:
max. of 8 characters
5.
Once you've finished inputting, touch <Accept> on the
touch keyboard.
6.
Touch Save As <Execute>.
This saves the settings file (.data) to the USB flash drive. "Done. " is
shown once the operation is finished.
7.
Touch <OK> to close the message.
26
Ó Ó
<System> tab Load / Save
Overwrite-saving
1.
From the [SETUP] button
Settings to USB Memory, touch <Save>.
The File Save window appears.
2.
Touch to select the settings file that you want to overwrite.
The settings file is overwrite-saved. "Done. " is shown once the
operation is finished.
3.
Touch <OK> to close the message.
Loading
Here's how to load this unit's settings that you saved on a USB flash
drive. When you load settings, the current settings are overwritten.
1.
From the [SETUP] button
Settings to USB Memory, touch <Load>.
The File Load window appears.
2.
Touch to select the settings file that you want to recall.
The settings are loaded. "Done. " is shown once the operation is
finished.
3.
Touch <OK> to close the message.
MEMO
If you recall network settings that are different from the current
settings while connected to that network, the connection is
severed.
Ó Ó
<System> tab Load / Save
Ó Ó
<System> tab Load / Save