Connecting Other Digital Snake Devices - Roland S-4000M Owner's Manual

Connecting Other Digital Snake Devices

Connecting digital snake devices other than the S-0808 and resetting the system (p. 20) makes the REAC master device detect the
input and output channel numbers as shown below.
The maximum number of channels assigned varies according to the input and output configuration of the connected REAC master device.
If the initially connected device is replaced with a different device, the channel-number mapping may not be detected correctly. When a device
has been replaced, the system must be reset to match the newly connected device.(p. 20)
* In the figures shown below, 1 through 4 refer to the REAC port numbers.
fig.variation.eps
OUTPUT CH1 - 8
INPUT CH1 - 32
S-4000S-3208
OUTPUT CH1 - 8
INPUT CH1 - 32
S-4000S-3208
OUTPUT CH1 - 8
INPUT CH1 - 16
S-1608
CH1 - 8 CH1 - 8
CH33 - 40 No Assign
S-0808
S-0808
1 2 3
CH1 - 8
CH33 - 40 (*)
S-1608
* No Assign to
INPUT 9-16
1 2
CH1 - 16
CH17 - 24
S-0816
1 2
OUTPUT CH1 - 8
INPUT CH1 - 16
S-1608 S-1608
1
OUTPUT CH1 - 8
INPUT CH1 - 32
S-4000S-3208
1 2
OUTPUT CH1 - 8
INPUT CH1 - 8 CH9 - 16
S-0808 S-0808
1 2
Connecting Peripheral Devices
CH1 - 8 CH1 - 8
CH17 - 32 CH33 - 40 (*)
S-1608
* No Assign to
2 3
INPUT 9-16
CH1 - 8
CH33 - 40 (*)
S-4000S-3208
* No Assign to
INPUT 9-32
CH1 - 8 CH1 - 16
CH17 - 24
S-0816
3
19