Using The Metronome - Roland S-1 Owner's Manual

Other useful functions

Using the metronome

Configuring the metronome
Here's how to change how the metronome plays and its volume.
1. Hold down the [SHIFT] button and press pad [15] (MENU).
2. Use the [TEMPO/VALUE] knob to select the parameters below, and then press pad [2] (ENTER).
Parameter
Ntro
(Metronome)
Ntr. L
(Metronome Level)
Setting the length (the number of beats) of the count-in
Here's how to set the length (the number of beats) of the count-in for recording.
1. Hold down the [SHIFT] button and press pad [15] (MENU).
2. Use the [TEMPO/VALUE] knob to select "Cnt. I ", and press pad [2] (ENTER).
Parameter Value
Cnt. I OFF, 2–4
(Count In)
The metronome or count-in click plays in quarter-note intervals.
The metronome timing is reset at the beginning of the pattern. (Ver. 1.02)
58
Value
OFF
rEC (Rec)
rC. P L (Rec&Play)
0–100
Explanation
Sets the length (the number of beats) of the count-in for recording.
Explanation
Always off
Turns on only when recording
Turns on during recording and playback
Sets the volume of the metronome.