Tempo Settings; Master Clock; Master Clock Settings; Tap Tempo - Roland Groovebox MC-707 Reference Manual

Tempo Settings

Master Clock

Clip switching and play/stop occurs at intervals of the master clock.
This means that the performances of each track can be synchronized
regardless of the timing of operation.
The status of the master clock is shown by the circle displayed in the
upper right of the screen. When the master clock indication points to
12 o'clock (straight up), the clip is switched or the play/stop operation
is executed.
The cycle of the master clock is specified by
LENGTH . "

Master Clock Settings

1 .
Hold down the [SHIFT] button
button .
Parameter Value
TEMPO 40.00–300.00
1/8,
1/16,
1/32,
SCALE
1/4T,
1/8T,
1/16T,
STEP LEN 2–128

Tap Tempo

Holding down the [SHIFT] button and pressing the [ENTER] button
three or more times.
The tempo is specified as average timing at which you press the
button.
52
"SCALE" "STEP
and
and press the [TEMPO]
Explanation
This is the tempo of the entire project.
In this page, you can also use the VALUE
dial to change the tempo.
Specifies the resolution.
1/8: eighth notes
1/16:
sixteenth notes
1/32: thirty-second notes
1/4T: quarter note triplets
1/8T: eighth note triplets
1/16T:
sixteenth note triplets
Specifies the cycle.