Video Input/Output Settings; Äsetting The Video Input/Output Format; Setting The System Format; Setting The Input Format For The Video In 1-6 Connectors - Roland VR-6HD Reference Manual

Video Input/Output Settings

Setting the Video Input/Output Format
Here's how to specify the input/output format as appropriate for the device that's connected.

Setting the System Format

On the VR-6HD, the input/output format is determined according to the
system format. You set the input/output format to match the connected
equipment.
Input format (*1)
System
VIDEO IN 1–6
format
connectors
1080p, 1080i
1080p
720p
720p
(*1) The VIDEO IN 1–6 connectors are compatible with multiple formats
(when using the factory settings). You can configure a different
input format for each connector, regardless of the system format.
Refer to "Setting the input format for the VIDEO IN 1–6 connectors"
on this page for details.
Ó
1 .
[MENU] button "SYSTEM"
and press the [VALUE] knob.
2 .
Use the [VALUE] knob to select "SYSTEM FORMAT", and then
press the [VALUE] knob.
3 .
Use the [VALUE] knob to select "1080p", or "720p", and press
the [VALUE] knob.
* A change in the setting is not applied until you press the [VALUE]
knob to confirm.
4 .
Press the [MENU] button to close the menu.
Internal processing
The VR-6HD's internal processing is progressive. Interlaced input video is
automatically converted to a progressive signal.
The video might appear jagged at this time, or the video in a PinP inset
screen or on the multi-view might waver.
This is due to progressive conversion, and is not a malfunction.
About frame rate
Set the frame rate of the VR-6HD from the [MENU] button
Ó
"SYSTEM FORMAT" "FRAME RATE".
* Set the frame rate for USB output from the [MENU] button
Ó
"SYSTEM" SYSTEM FORMAT "USB OUT"
* Set the frame rate for streaming and for video recording from the
Ó
[MENU] button "SYSTEM"
Ó
"FRAME RATE".
14
Output format
USB STREAM
connector
VIDEO OUT 1–3
connectors
DIRECT STREAM
port
1080p, 1080i 1080p, 720p
720p 720p
Ó
select "SYSTEM FORMAT",
Ó
"SYSTEM"
Ó
Ó
"FRAME RATE".
Ó
SYSTEM FORMAT "STREAM/RECORD"
Setting the Input Format for the VIDEO IN 1–6
Connectors
Using the factory settings, the EDID assignment for the VIDEO IN 1–6
connectors is "INTERNAL" (so that EDID values of all formats that can be
input are sent).
To specify an input format of your choice, change the setting of the EDID
information being sent so that it matches the incoming video signal.
What is EDID?
EDID is data that is transmitted from the VR-6HD to the source
device when the VR-6HD is connected to a source device.
EDID contains data such as the formats that can be input to
the VR-6HD (resolution, color space, color depth) and audio
information.
Based on the EDID information that the source device receives, it
will output the most appropriate video format to the VR-6HD.
1 .
[MENU] button
1"–"VIDEO IN 6"
knob.
2 .
Use the [VALUE] knob to set the input format (the EDID
information to send), and press the [VALUE] knob.
* A change in the setting is not applied until you press the [VALUE]
knob to confirm.
Value
INTERNAL (EDID information for all input table formats is sent.)
SVGA (800 x 600)
XGA (1024 x 768)
WXGA (1280 x 800)
FWXGA (1366 x 768)
SXGA (1280 x 1024)
SXGA+ (1400 x 1050)
UXGA (1600 x 1200)
WUXGA (1920 x 1200)
720p
1080i
1080p
Ó
3 .
Press the [MENU] button to close the menu.
Ó Ó Ó
"VIDEO" "INPUT" "VIDEO IN
Ó
select "EDID" and press the [VALUE]