Äswitching The Video Automatically (Auto Switching); About The Operation Mode; Turning The Auto Switching Function On/Off; Setting The Operation Mode - Roland VR-6HD Reference Manual

Video Operations
Switching the Video Automatically (Auto Switching)
The video of INPUT 1–6 or of scene memories (p. 65) can be switched automatically (the auto switching function).
You can make operation easier by letting the video switch automatically.

About the Operation Mode

Auto switching provides six operation modes that you can select as
appropriate for your situation: "input scan", "scene memory scan", "beat
sync", "video follows audio", "PinP & KEY scan" and "DSK scan".
Switching at a specified interval (input scan)
This automatically switches the INPUT 1–6 video when a specified length
of time elapses. You can change the duration that each video is shown,
and also switch randomly between videos.
This is convenient when you want to switch between video signals
of multiple cameras, for example when live-streaming a singer-
instrumentalist.
* If there is no video input, this is skipped.
Switching scene memories (scene memory scan)
This automatically recalls between scene memories 1–32. The video and
audio are switched according to the settings that are saved in each scene
memory.
* Scene memories in which no settings have been saved are skipped.
Switching in sync with the beat of the music (beat sync)
This detects the beat of the song, and automatically switches the video
at intervals of the beat. This lets you create video transitions that are
synchronized with the music, for example when live-streaming a DJ
performance or a musical performance.
Switching according to the mic volume (video follows audio)
This detects the audio that is input from a mic, and automatically
switches to the specified video according to the volume. For example, if
you're streaming a talk show or a conversation, you can use this to switch
between a close-up of the individual who is speaking and a wide shot of
both people when neither person is speaking.
Switching between PinP & KEY videos (PinP & KEY scan)
The PinP & KEY 1/2 video automatically changes after a specified length
of time. You can change the duration that each video is shown, and also
switch randomly between videos.
Switching between DSK videos (DSK scan)
The DSK video automatically changes after a specified length of time.
You can change the duration that each video is shown, and also switch
randomly between videos.
22

Turning the Auto Switching Function On/Off

Ó
1 .
[MENU] button select "AUTO SWITCHING", and press the
[VALUE] knob.
The Auto Switching setup screen appears.
2 .
Use the [VALUE] knob to select "AUTO SWITCHING", and
press the [VALUE] knob.
3 .
Use the [VALUE] knob to select "ON", and then press the
[VALUE] knob.
The video automatically switches according to the operating mode.
4 .
To turn auto-switching off, select "OFF".
5 .
Press the [MENU] button to close the screen.

Setting the Operation Mode

Ó
1 .
[MENU] button select "AUTO SWITCHING", and press the
[VALUE] knob.
The Auto Switching setup screen appears.
2 .
Use the [VALUE] knob to select "TYPE", and then press the
[VALUE] knob.
3 .
Use the [VALUE] knob to select the operation mode, and
press the [VALUE] knob.
The video automatically switches according to the operating mode.