Select Aux Sends Window; Function Mode; List Of Function Mode Functions - Roland M-5000 Reference Manual

SELECT AUX SENDS Window

Tapping <AUX TARGET> displays the SELECT AUX SENDS window.
* This is not displayed when no AUX exists.
Selects the AUX selected in the knob section area
of the HOME screen.
Also simultaneously selects AUXes accessed
when SENDS ON FADER was on.
AUX 1 - AUX (n)
After selection, the SELECT AUX SENDS window
disappears.
* The value of (n) depends the number of AUXes
created.
Turns on SOLO for the AUX worked with while
SENDS ON FADER is on.
Also turns on SOLO for the AUX worked with
SOLO FOLLOWS
when the AUX is assigned to the knob section
area of the HOME screen and the SELECT AUX
SENDS window is displayed.
SET SOLO AUX is selected unless SOLO is turned on, even
EXCEPTION
when <SOLO FOLLOWS> is on.
When this is on, the SELECT AUX SENDS window
KEEP WINDOW remains open after <AUX 1> - <AUX (n)> is
tapped.

Function Mode

Pressing the [FUNC] button in the fader bank section enables the Function mode, and a variety of selectable functions are displayed in the fader bank
display.

List of Function Mode Functions

Function Description
SELECT SOLO Selects SOLO 1 or SOLO 2.
Makes the setting for Recall Safe.
RECALL SAFE
Channels set as Recall Safe are excluded from
scene recall.
ASSIGN
Assigns a channel to a USER layer.
FADER
UNASSIGN
Releases a channel assigned to a USER layer.
FADER
SET COLOR Selects a channel color.
Sets an anchor channel.
SET ANCHOR
0"Anchor Channels" (p. 119)
Parameter
SOLO 1/SOLO 2/SOLO 1+2
SAFE ON/SAFE OFF
-
-
RED/ORANGE/YELLOW/LIME/GREEN/BLUE/
NAVY/VIOLET/BLACK
ANCHOR ON/ANCHOR OFF
Fader Bank Section
Operation
0"Setting Parameters for Channels Using the Top
Panel" (p. 122)
0"Setting Parameters for Channels Using the Top
Panel" (p. 122)
0"Assigning Channels to Faders" (p. 126)
0"Canceling Channel Assignments to Faders"
(p. 126)
0"Setting Parameters for Channels Using the Top
Panel" (p. 122)
0"Setting Parameters for Channels Using the Top
Panel" (p. 122)
121