Effects; Effect On/Off; Effect Settings; Effect Connection (Effect Routing) - Roland MC-909 Owner's Manual

Effects

Here you can apply special effects to the sound.

Effect on/off

Use the ON/OFF buttons of the Effects section to switch each effect
on/off.
fig.4-01
[COMP]: Compressor
[MFX 1]: Multi-effects 1
[MFX 2]: Multi-effects 2
[REVERB]: Reverb

Effect settings

1. In the top screen of each mode, press [F4 (Effects)].
2. Press [F1]–[F5] to select an effect to adjust.
[F1 (Routing)] Specify the connections (routing) between
parts, effects, and output destinations.
[F2 (Comp/EQ)] Compressor settings.
[F3 (MFX 1)] Multi-effects 1 settings.
[F4 (MFX 2)] Multi-effects 2 settings.
[F5 (Reverb)] Reverb settings.
3. Use [CURSOR] to select a parameter.
4. Use [VALUE] or [INC/DEC] to make settings.
88

Effect connection (Effect Routing)

You can specify the connections independently for each pattern.
The way in which the direct sound is output (2) and the depth of
reverb (3) can be set independently for each part.
fig.4-02
1
2
4
5
3
Parameter Range
1.
1–16, EXT
Part Number
2.
DRY, MFX1,
Part Output MFX2,
Assign COMP, DIR1,
DIR2, RHY
3.
0–127
Part Reverb
Send Level
4.
(see explana-
Comp Output tion)
Assign
5.
0–127
Comp Reverb
Send Level
6.
See "Multi-Ef-
(MFX Type) fects List" (p.
92)
6
7
8
10
9
11
Explanation
The part for which you are
making effect settings.
EXT: External input
How the original sound of
each part will be output
DRY: Output to MIX OUT-
PUT jacks without passing
through effects
MFX1 (2): Output through
multi-effects 1 (or 2)
COMP: Output through the
compressor
DIR1 (2): Output to the DI-
RECT 1 (or DIRECT 2) jacks
without passing through ef-
fects
RHY: Output according to
the settings of the rhythm
set assigned to the part
* "RHY" can be set only
when a rhythm set is as-
signed to the part.
Depth of reverb applied to
each part
Set this to 0 if you don't
want to apply reverb.
Output destination of the
sound processed through the
compressor.
DRY: MIX OUTPUT jacks
MFX1 (2): Multi-effects 1
(or 2 )
Depth of reverb applied to the
sound processed through the
compressor
Set this to 0 if you don't
want to apply reverb.
The effect used by multi-ef-
fects 1
* For details on each effect,
refer to "Multi-Effects List"
(p. 92).