Using An Effect Preset - Roland VR-6HD Reference Manual

Using an Effect Preset

The VR-6HD is equipped with effects that are adjusted for specific
environments. These are called "effect presets".
The effect presets are created using a combination of four effects (high-
pass filter, compressor, equalizer, noise gate).
Simply by selecting an effect preset, you can easily apply an effect that's
appropriate for your situation.
MEMO
¹ To make detailed adjustments to a preset, edit the high-pass filter,
compressor, equalizer and noise gate settings on the channel
setup screen.
¹ You cannot overwrite the effect presets. Use the scene memories
to save the settings for presets you've edited (p. 65).
¹ When you load an effect preset, each preset setting is restored to
its default setting (factory settings).
1 .
Touch <EFFECT PRESET> on the channel setup screen.
2 .
Use the [VALUE] knob to select an effect preset, and press
the [VALUE] knob.
Value Explanation
DEFAULT For line input (default setting)
MEETING For meetings
INTERVIEW For interviews
AMBIENT MIC For capturing ambient sound
WINDY FIELD For capturing ambient sound in a windy area
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 .
Use the [VALUE] knob to select "OK", and then press the
[VALUE] knob.
The effect preset is loaded.
4 .
Configure the settings for each effect as necessary.
Touch the onscreen graphics to enlarge the settings for the effect. You
can also directly drag a point on the graph onscreen to edit.
ÁNoise gate
ÁCompressor
ÁEqualizer, High-pass filter
* For details on the parameter, refer to "2: AUDIO" (p. 99).
Audio Operations
45