Removing And Installing Memory Riser Cards And Dimms; Replace A Faulty Dimm - Oracle Sun Server X4-4 Service Manual

Removing and Installing Memory Riser Cards and
DIMMs
Use the following procedures to remove and install memory risers, DIMMs, and filler panels.
"Replace a Faulty DIMM" on page 129
■
"Replace a Faulty Memory Riser Card" on page 130
■
"Remove a Memory Riser Card" on page 131
■
"Identify a Faulty DIMM" on page 133
■
"Remove a DIMM" on page 134
■
"Install a DIMM" on page 136
■
"Install a Memory Riser Card" on page 138
■

Replace a Faulty DIMM

Use this procedure to replace a faulty DIMM.
When servicing the components in this section, unplug the AC power cords and use ESD
protection.
To view a video of replacing a DIMM, see
Tip -
videos/E55189/dimmreplace.html.
For serviceability considerations, see
Before You Begin ■
For DIMM designation information, see
■
For reference information, see
■
1. Identify the MR card containing the faulty DIMM. See
Riser Card, DIMM, or CPU" on page
2. Remove the MR card. See
http://docs.oracle.com/cd/E38212_01/
"Component Serviceability" on page
"Component Designations" on page
"Memory Riser Card and DIMM Reference" on page
81.
"Remove a Memory Riser Card" on page
Replace a Faulty DIMM
66.
69.
"Locate a Failed Memory
131.
Servicing CRU Components
141.
129