ABB RELION 670 Series Technical Manual page 904

Section 14
Control
Table 532: TR8ATCC (90) Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
MeasMode A
B
C
AB
BC
CA
PosSeq
Q1 -9999.99 -
9999.99
Q2 -9999.99 -
9999.99
Q3 -9999.99 -
9999.99
TotalBlock Disabled
Enabled
AutoBlock Disabled
Enabled
FSDMode Disabled
Auto
AutoMan
tFSD 1.0 - 100.0
Vset 85.0 - 120.0
VDeadband 0.2 - 9.0
VDeadbandInner 0.1 - 9.0
Vmax 80 - 180
Vmin 70 - 120
Vblock 50 - 120
t1Use Constant
Inverse
t1 3 - 1000
t2Use Constant
Inverse
t2 1 - 1000
t_MinTripDelay 3 - 120
OperationLDC Disabled
Enabled
Table continues on next page
898
Unit Step Default
- - Disabled
- - PosSeq
MVAr 0.01 0
MVAr 0.01 0
MVAr 0.01 0
- - Disabled
- - Disabled
- - Disabled
s 0.1 15.0
%VB 0.1 100.0
%VB 0.1 1.2
%VB 0.1 0.9
%VB 1 105
%VB 1 80
%VB 1 80
- - Constant
s 1 60
- - Constant
s 1 15
s 1 5
- - Disabled
1MRK 502 066-UUS B
Description
Operation Disabled/Enabled
Selection of measured voltage and current
Size of cap/reactor bank 1 in MVAr, >0 for
C and <0 for L
Size of cap/reactor bank 2 in MVAr, >0 for
C and <0 for L
Size of cap/reactor bank 3 in MVAr, >0 for
C and <0 for L
Total block of the voltage control function
Block of the automatic mode in voltage
control function
Fast step down function activation mode
Time delay for lower command when fast
step down mode is activated
Voltage control set voltage, % of rated
voltage
Outer voltage deadband, % of rated
voltage
Inner voltage deadband, % of rated
voltage
Upper lim of busbar voltage, % of rated
voltage
Lower lim of busbar voltage, % of rated
voltage
Undervoltage block level, % of rated
voltage
Activation of long inverse time delay
Time delay (long) for automatic control
commands
Activation of short inverse time delay
Time delay (short) for automatic control
commands
Minimum operating time in inverse mode
Operation line voltage drop compensation
Technical manual
PID-6559-SETTINGS v3