ABB RELION 670 Series Technical Manual page 1027

1MRK 502 066-UUS B
Table 736: VMMXU Non group settings (basic)
Name Values (Range)
VAB_DbRepInt 1 - 300
Operation Disabled
Enabled
VAB_ZeroDb 0 - 100000
VAB_Max 0.0 - 200.0
VAB_RepTyp Cyclic
Dead band
Int deadband
GlobalBaseSel 1 - 12
VAB_AnDbRepInt 1 - 300
VBC_DbRepInt 1 - 300
VB_ZeroDb 0 - 100000
VBC_Max 0.0 - 200.0
VBC_RepTyp Cyclic
Dead band
Int deadband
VBC_AnDbRepInt 1 - 300
VCA_DbRepInt 1 - 300
VC_ZeroDb 0 - 100000
VCA_Max 0.0 - 200.0
VCA_RepTyp Cyclic
Dead band
Int deadband
VCA_AnDbRepInt 1 - 300
Table 737: VMMXU Non group settings (advanced)
Name Values (Range)
VAB_HiHiLim 0.0 - 200.0
VAB_HiLim 0.0 - 200.0
VAB_LowLim 0.0 - 200.0
VAB_LowLowLim 0.0 - 200.0
VMagComp100 -10.000 - 10.000
VAB_Min 0.0 - 200.0
VAB_LimHys 0.000 - 100.000
Table continues on next page
Technical manual
Unit Step Default
Type 1 10
- - Disabled
m% 1 1
%VB 0.1 200.0
- - Cyclic
- 1 1
Type 1 10
Type 1 10
m% 1 1
%VB 0.1 200.0
- - Cyclic
Type 1 10
Type 1 10
m% 1 1
%VB 0.1 200.0
- - Cyclic
Type 1 10
Unit Step Default
%VB 0.1 150.0
%VB 0.1 120.0
%VB 0.1 80.0
%VB 0.1 60.0
% 0.001 0.000
%VB 0.1 50.0
% 0.001 5.000
Description
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Disbled/Enabled operation
Zero point clamping
Maximum value in % of VBase
Reporting type
Selection of one of the Global Base Value
groups
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Zero point clamping
Maximum value in % of VBase
Reporting type
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Zero point clamping
Maximum value in % of VBase
Reporting type
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Description
High High limit in % of UBase
High limit in % of VBase
Low limit in % of VBase
Low Low limit in % of VBase
Magnitude factor to calibrate voltage at
100% of Vn
Minimum value in in % of VBase
Hysteresis value in % of range and is
common for all limits
Section 16
Monitoring
PID-3767-SETTINGS v5
1021