ABB RELION 670 Series Technical Manual page 1121

1MRK 502 066-UUS B
18.4.2 Communication interfaces and protocols
Table 809: Supported station communication interfaces and protocols
Protocol
IEC 61850–8–1
DNP3
IEC 60870-5-103
● = Supported
18.4.3 Settings
Table 810: IEC61850-8-1 Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
PortSelGOOSE Front
LANAB
LANCD
PortSelMMS Front
LANAB
LANCD
Any
Protocol Edition Ed 1
Ed 2
RemoteModControl Disabled
Maintenance
All levels
AllowSimulation No
Yes
IEC61850BufTimEnable Disabled
Enabled
EnableSettings Disabled
Enabled
ResvTms 1 - 3600
Technical manual
Ethernet
100BASE-FX (ST connector)
●
●
-
When double Ethernet ports are activated, make sure that the two ports are
connected to different subnets. For example: Port 1 has IP-address 138.227.102.10
with subnet mask 255.255.255.0 and port 2 has IP-address 138.227.103.10 with
subnet mask 255.255.255.0
Unit Step
- -
- -
- -
- -
- -
- -
- -
- -
s 1
Glass fiber (ST connector)
-
●
●
Default Description
Disabled Operation Disabled/Enabled
LANAB Port selection for GOOSE communication
Any Port selection for MMS communication
Ed 1 Protocol Edition
Disabled Remote Mode Control
No Allow simulated GOOSE values or
simulated sampled measured values
Enabled Enable BRC buf time behavior
Disabled Enable 61850 Edition 2 setting
60 Reservation time
Section 18
Station communication
GUID-35C845D3-574A-40D1-AEF1-9E0D330E31DE v6
Serial
EIA-485
-
●
●
PID-6495-SETTINGS v3
1115