ABB RELION 670 Series Technical Manual page 1180

Section 18
Station communication
Name Values (Range)
TypNo8 Absolute
Relative
GiNo1 Excluded
Included
GiNo2 Excluded
Included
GiNo3 Excluded
Included
GiNo4 Excluded
Included
GiNo5 Excluded
Included
GiNo6 Excluded
Included
GiNo7 Excluded
Included
GiNo8 Excluded
Included
The FunctionType parameter associates a particular instance of the function block with a FUN.
Refer to the IEC60870-5-103 standard for details.
The InfNo
Refer to the IEC60870-5-103 standard for details.
The TypNo
TYPE IDENTIFICATION (TYP) message types 1 (time-tagged message) and 2 (time-tagged message
with relative time) of the IEC60870-5-103 standard.
The GiNo
the IEC60870-5-103 standard for details.
18.8.10 Function commands for IEC 60870-5-103 I103CMD
18.8.10.1 Functionality
I103CMD is a command function block in control direction with pre-defined output signals. The
signals are in steady state, not pulsed, and stored in the IED in case of restart.
18.8.10.2 Identification
Function description
Function commands for IEC
60870-5-103
1174
Unit
-
-
-
-
-
-
-
-
-
n parameters are used to associate each individual input signal with a userdefined INF.
n parameters determine if messages use absolute or relative time. This adheres to the
n parameters determine whether a message is sent as a part of a GI reply or not. Refer to
Step Default
- Absolute
- Included
- Included
- Included
- Included
- Included
- Included
- Included
- Included
Function block IEC 60617
name identification
I103CMD -
1MRK 502 066-UUS B
Description
Type identification (TYP)
Response and status change (GI)
Response and status change (GI)
Response and status change (GI)
Response and status change (GI)
Response and status change (GI)
Response and status change (GI)
Response and status change (GI)
Response and status change (GI)
GUID-86DE9DBA-BE2F-4CC9-B447-1D2D86849EFF v1
GUID-973929FE-292B-42A5-ACF9-BC95E2B16AE1 v2
GUID-CFD43980-0791-40D1-9136-CF4CCC35549A v1
ANSI/IEEE C37.2
device number
-
Technical manual