ABB RELION 670 Series Technical Manual page 1032

Section 16
Monitoring
Name Values (Range)
V1AngRepTyp Cyclic
Dead band
Int deadband
V2HiHiLim 0.0 - 200.0
V2HiLim 0.0 - 200.0
V2LowLim 0.0 - 200.0
V2LowLowLim 0.0 - 200.0
V2AngZeroDb 0 - 100000
Table 742: VNMMXU Non group settings (basic)
Name Values (Range)
VA_DbRepInt 1 - 300
Operation Disabled
Enabled
VA_ZeroDb 0 - 100000
VA_Max 0.0 - 200.0
VA_RepTyp Cyclic
Dead band
Int deadband
GlobalBaseSel 1 - 12
VA_LimHys 0.000 - 100.000
VA_AnDbRepInt 1 - 300
VB_DbRepInt 1 - 300
VB_ZeroDb 0 - 100000
VB_Max 0.0 - 200.0
VB_RepTyp Cyclic
Dead band
Int deadband
VB_LimHys 0.000 - 100.000
VB_AnDbRepInt 1 - 300
VC_DbRepInt 1 - 300
VC_ZeroDb 0 - 100000
VC_Max 0.0 - 200.0
Table continues on next page
1026
Unit Step Default
- - Cyclic
%VB 0.1 150.0
%VB 0.1 120.0
%VB 0.1 80.0
%VB 0.1 60.0
m% 1 0
Unit Step Default
Type 1 10
- - Disabled
m% 1 1
%VB 0.1 200.0
- - Cyclic
- 1 1
% 0.001 5.000
Type 1 10
Type 1 10
m% 1 1
%VB 0.1 200.0
- - Cyclic
% 0.001 5.000
Type 1 10
Type 1 10
m% 1 1
%VB 0.1 200.0
1MRK 502 066-UUS B
Description
Reporting type
High High limit in % of UBase
High limit in % of VBase
Low limit in % of VBase
Low Low limit in % of VBase
Zero point clamping in 0.001% of range
Description
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Disbled/Enabled operation
Zero point clamping
Maximum value in % of VBase
Reporting type
Selection of one of the Global Base Value
groups
Hysteresis value in % of range and is
common for all limits
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Zero point clamping
Maximum value in % of VBase
Reporting type
Hysteresis value in % of range and is
common for all limits
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Zero point clamping
Maximum value in % of VBase
Technical manual
PID-3756-SETTINGS v5