ABB RELION 670 Series Technical Manual page 1162

Section 18
Station communication
Function block
MIM15-CH6
MIM16-CH1
MIM16-CH2
MIM16-CH3
MIM16-CH4
MIM16-CH5
MIM16-CH6
The SPA addresses for the pulse counter values PCFCNT:1 to PCFCNT:16 are found in table 856.
Table 856: SPA addresses for the PCFCNT function
Function block
PCFCNT:1
PCFCNT:2
PCFCNT:3
PCFCNT:4
PCFCNT:5
PCFCNT:6
PCFCNT:7
PCFCNT:8
PCFCNT:9
PCFCNT:10
PCFCNT:11
PCFCNT:12
PCFCNT:13
PCFCNT:14
PCFCNT:15
PCFCNT:16
I/O modules
To read binary inputs, the SPA-addresses for the outputs of the I/O-module function block are
used, that is, the addresses for BI1 – BI16. For SPA addresses, refer to section Related documents
in Product Guide.
Single command, 16 signals
The IEDs can be provided with a function to receive signals either from a substation automation
system or from the local HMI. That receiving function block has 16 outputs that can be used, for
example, to control high voltage apparatuses in switchyards. For local control functions, the local
HMI can also be used.
Single command, 16 signals function consists of three function blocks; SINGLECMD:1 to
SINGLECMD:3 for 16 binary output signals each.
1156
SPA address
4-O-6747
4-O-6755
4-O-6758
4-O-6759
4-O-6762
4-O-6763
4-O-6766
SPA address CNT_VAL
6-O-2788
6-O-2794
6-O-2800
6-O-2806
6-O-2812
6-O-2818
6-O-2824
6-O-2830
6-O-2836
6-O-2842
6-O-2848
6-O-2854
6-O-2860
6-O-2866
6-O-2872
6-O-2878
SPA address NEW_VAL
6-O-2787
6-O-2793
6-O-2799
6-O-2805
6-O-2811
6-O-2817
6-O-2823
6-O-2829
6-O-2835
6-O-2841
6-O-2847
6-O-2853
6-O-2859
6-O-2865
6-O-2871
6-O-2877
1MRK 502 066-UUS B
M11880-16 v4
M11880-35 v1
M11880-51 v4
Technical manual