ABB RELION 670 Series Technical Manual page 953

1MRK 502 066-UUS B
Name
INPUT30
INPUT31
INPUT32
Table 592: TMAGAPC Output signals
Name
OUTPUT1
OUTPUT2
OUTPUT3
15.2.5 Settings
Table 593: TMAGAPC Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
PulseTime 0.050 - 60.000
OnDelay 0.000 - 60.000
OffDelay 0.000 - 60.000
ModeOutput1 Steady
Pulsed
ModeOutput2 Steady
Pulsed
ModeOutput3 Steady
Pulsed
15.2.6 Operation principle
The trip matrix logic (TMAGAPC) block is provided with 32 input signals and 3 output signals. The
function block incorporates internal logic OR gates in order to provide grouping of connected
input signals to the three output signals from the function block.
Internal built-in OR logic is made in accordance with the following three rules:
1. when any one of first 16 inputs signals (INPUT1 to INPUT16) has logical value 1 the first output
signal (OUTPUT1) will get logical value 1.
2. when any one of second 16 inputs signals (INPUT17 to INPUT32) has logical value 1 the second
output signal (OUTPUT2) will get logical value 1.
3. when any one of all 32 input signals (INPUT1 to INPUT32) has logical value 1 the third output
signal (OUTPUT3) will get logical value 1.
Technical manual
Type Default Description
BOOLEAN 0 Binary input 30
BOOLEAN 0 Binary input 31
BOOLEAN 0 Binary input 32
Type Description
BOOLEAN OR function betweeen inputs 1 to 16
BOOLEAN OR function between inputs 17 to 32
BOOLEAN OR function between inputs 1 to 32
Unit Step
- -
s 0.001
s 0.001
s 0.001
- -
- -
- -
Default Description
Disabled Operation Disabled/Enabled
0.150 Output pulse time
0.000 Output on delay time
0.000 Output off delay time
Steady Mode for output ,1 steady or pulsed
Steady Mode for output 2, steady or pulsed
Steady Mode for output 3, steady or pulsed
Section 15
Logic
PID-4125-OUTPUTSIGNALS v7
PID-4125-SETTINGS v7
SEMOD52537-5 v8
947