ABB RELION 670 Series Technical Manual page 1184

Section 18
Station communication
18.8.12.5 Settings
Table 884: I103USRCMD Non group settings (basic)
Name Values (Range)
FunctionType 1 - 255
PulseMode Steady
Pulsed
PulseLength 0.200 - 60.000
InfNo_1 1 - 255
InfNo_2 1 - 255
InfNo_3 1 - 255
InfNo_4 1 - 255
InfNo_5 1 - 255
InfNo_6 1 - 255
InfNo_7 1 - 255
InfNo_8 1 - 255
18.8.13 Function commands generic for IEC 60870-5-103 I103GENCMD
18.8.13.1 Functionality
I103GENCMD is used for transmitting generic commands over IEC 60870-5-103. The function has
two outputs signals CMD_OFF and CMD_ON that can be used to implement double-point
command schemes.
The I103GENCMD component can be configured as either 2 pulsed ON/OFF or 2 steady ON/OFF
outputs. The ON output is pulsed with a command with value 2, while the OFF output is pulsed
with a command value 1. If in steady mode is ON asserted and OFF deasserted with command 2
and vice versa with command 1. Steady mode is selected by setting PulseLength=0. The
I103GENCMD is retained, and a command in steady mode will be reissued on restart.
18.8.13.2 Identification
Function description
Function commands generic for IEC
60870-5-103
1178
Unit Step Default
- 1 1
- - Pulsed
s 0.001 0.400
- 1 1
- 1 2
- 1 3
- 1 4
- 1 5
- 1 6
- 1 7
- 1 8
Function block
name
I103GENCMD
Description
Function type (1-255)
Pulse mode
Pulse length
Information number for output 1 (1-255)
Information number for output 2 (1-255)
Information number for output 3 (1-255)
Information number for output 4 (1-255)
Information number for output 5 (1-255)
Information number for output 6 (1-255)
Information number for output 7 (1-255)
Information number for output 8 (1-255)
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
1MRK 502 066-UUS B
PID-3790-SETTINGS v4
GUID-729E9AFD-0468-4BBD-B54A-A6CDCC68A9B2 v3
GUID-1933A30C-5214-4116-8CD3-91BD975FACED v1
Technical manual