ABB RELION 670 Series Technical Manual page 525

1MRK 502 066-UUS B
Table 251: TRPTTR (49) Output signals
Name
TRIP
PICKUP
ALARM1
ALARM2
LOCKOUT
WARNING
8.7.5 Settings
Table 252: TRPTTR (49) Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
IRef 10.0 - 1000.0
IRefMult 0.01 - 10.00
IBase1 30.0 - 250.0
IBase2 30.0 - 250.0
Tau1 0.10 - 500.00
Tau2 0.10 - 500.00
IHighTau1 30.0 - 250.0
Tau1High 5 - 2000
ILowTau1 30.0 - 250.0
Tau1Low 5 - 2000
IHighTau2 30.0 - 250.0
Tau2High 5 - 2000
ILowTau2 30.0 - 250.0
Tau2Low 5 - 2000
ITrip 50.0 - 250.0
Table continues on next page
Technical manual
Type Description
BOOLEAN Trip Signal
BOOLEAN Pickup signal
BOOLEAN First level alarm signal
BOOLEAN Second level alarm signal
BOOLEAN Lockout signal
BOOLEAN Warning signal: Trip within set warning time
Unit Step
- -
% 1.0
- 0.01
%IB 1.0
%IB 1.0
Min 0.01
Min 0.01
%IB1 1.0
%tC1 1
%IB1 1.0
%tC1 1
%IB2 1.0
%tC2 1
%IB2 1.0
%tC2 1
%IBx 1.0
Default Description
Disabled Operation Disabled/Enabled
100.0 Reference current in %
1.00 Multiplication Factor for reference current
100.0 Base current, IBase1 without Cooling input
in % of IBase
100.0 Base Current, IBase2, with Cooling input
ENABLED in % of IBase
60.00 Time constant without cooling input in
min, with IBase1
60.00 Time constant with cooling input in min,
with IBase2
100.0 Current Sett, in % of IBase1 for rescaling
TC1 by TC1-IHIGH
100 Multiplier in % to TC1 when current is >
IHIGH-TC1
100.0 Current Set, in % of IBase1 for rescaling
TC1 by TC1-ILOW
100 Multiplier in % to TC1 when current is <
ILOW-TC1
100.0 Current Set, in % of IBase2 for rescaling
TC2 by TC2-IHIGH
100 Multiplier in % to TC2 when current is
>IHIGH-TC2
100.0 Current Set, in % of IBase2 for rescaling
TC2 by TC2-ILOW
100 Multiplier in % to TC2 when current is <
ILOW-TC2
110.0 Steady state operate current level in % of
IBasex
Section 8
Current protection
PID-4148-OUTPUTSIGNALS v4
PID-6862-SETTINGS v1
519