ABB RELION 670 Series Technical Manual page 1173

1MRK 502 066-UUS B
18.8.5.4 Signals
Table 866: I103EF Input signals
Name
BLOCK
51_EFFW
52_EFREV
18.8.5.5 Settings
Table 867: I103EF Non group settings (basic)
Name Values (Range)
FunctionType 1 - 255
18.8.6 Function status fault protection for IEC 60870-5-103
I103FLTPROT
18.8.6.1 Functionality
I103FLTPROT is used for fault indications in monitor direction. Each input on the function block is
specific for a certain fault type and therefore must be connected to a correspondent signal
present in the configuration. For example: 68_TRGEN represents the General Trip of the device,
and therefore must be connected to the general trip signal SMPPTRC_TRIP or equivalent.
The delay observed in the protocol is the time difference in between the signal that is triggering
the Disturbance Recorder and the respective configured signal to the IEC 60870-5-103
I103FLTPROT.
18.8.6.2 Identification
Function description
Function status fault protection for
IEC 60870-5-103
Technical manual
Type Default Description
BOOLEAN 0 Block of status reporting
BOOLEAN 0 Information number 51, ground-fault forward
BOOLEAN 0 Information number 52, ground-fault reverse
Unit Step
- 1
Function block
name
I103FLTPROT
Default Description
160 Function type (1-255)
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
Section 18
Station communication
PID-3974-INPUTSIGNALS v4
PID-3974-SETTINGS v4
GUID-6D52F442-1592-4BA7-919C-0CD79046CAE5 v1
GUID-55593EC4-7AED-47A0-8311-DB22D013A193 v1
1167