ABB RELION 670 Series Technical Manual page 1267

1MRK 502 066-UUS B
21.6.4 Operation principle
The Signal matrix for binary inputs (SMBI) function , see figure 635, receives its inputs from the
real (hardware) binary inputs via the Signal Matrix Tool (SMT), and makes them available to the
rest of the configuration via its outputs, BI1 to BI10. The inputs and outputs, as well as the whole
block, can be given a user defined name. These names will be represented in SMT as information
which signals shall be connected between physical IO and SMBI function. The input/output user
defined name will also appear on the respective output/input signal.
21.7 Signal matrix for binary outputs SMBO
21.7.1 Functionality
The Signal matrix for binary outputs (SMBO) function is used within the Application Configuration
Tool (ACT) in direct relation with the Signal Matrix Tool (SMT), see the application manual to get
information about how binary inputs are sent from one IED configuration.
21.7.2 Function block
BO1
BO2
BO3
BO4
BO5
BO6
BO7
BO8
BO9
BO10
IEC05000439 V2 EN-US
Figure 636: SMBO function block
21.7.3 Signals
Table 978: SMBO Input signals
Name
BO1
BO2
BO3
BO4
BO5
BO6
BO7
Table continues on next page
Technical manual
SMBO
^BO1
^BO2
^BO3
^BO4
^BO5
^BO6
^BO7
^BO8
^BO9
^BO10
IEC05000439-2-en.vsd
Type Default
BOOLEAN 0
BOOLEAN 0
BOOLEAN 0
BOOLEAN 0
BOOLEAN 0
BOOLEAN 0
BOOLEAN 0
Description
Signal name for BO1 in Signal Matrix Tool
Signal name for BO2 in Signal Matrix Tool
Signal name for BO3 in Signal Matrix Tool
Signal name for BO4 in Signal Matrix Tool
Signal name for BO5 in Signal Matrix Tool
Signal name for BO6 in Signal Matrix Tool
Signal name for BO7 in Signal Matrix Tool
Section 21
Basic IED functions
M15305-3 v4
SEMOD55215-1 v2
M15311-3 v5
SEMOD54860-4 v3
SEMOD55887-1 v2
PID-3831-INPUTSIGNALS v4
1261