ABB RELION 670 Series Technical Manual page 551

1MRK 502 066-UUS B
8.11.5 Settings
Table 278: GUPPDUP (37) Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
OpMode1 Disabled
UnderPower
Power1 0.0 - 500.0
Angle1 -180.0 - 180.0
TripDelay1 0.01 - 6000.00
DropDelay1 0.01 - 6000.00
OpMode2 Disabled
UnderPower
Power2 0.0 - 500.0
Angle2 -180.0 - 180.0
TripDelay2 0.01 - 6000.00
DropDelay2 0.01 - 6000.00
Table 279: GUPPDUP (37) Group settings (advanced)
Name Values (Range)
TD 0.000 - 0.999
Hysteresis1 0.2 - 5.0
Hysteresis2 0.2 - 5.0
IMagComp5 -10.000 - 10.000
IMagComp30 -10.000 - 10.000
IMagComp100 -10.000 - 10.000
VMagComp5 -10.000 - 10.000
VMagComp30 -10.000 - 10.000
VMagComp100 -10.000 - 10.000
IAngComp5 -10.000 - 10.000
IAngComp30 -10.000 - 10.000
IAngComp100 -10.000 - 10.000
Technical manual
Unit Step Default
- - Disabled
- - UnderPower
%SB 0.1 1.0
Deg 0.1 0.0
s 0.01 1.00
s 0.01 0.06
- - UnderPower
%SB 0.1 1.0
Deg 0.1 0.0
s 0.01 1.00
s 0.01 0.06
Unit Step Default
- 0.001 0.000
%SB 0.1 0.5
%SB 0.1 0.5
% 0.001 0.000
% 0.001 0.000
% 0.001 0.000
% 0.001 0.000
% 0.001 0.000
% 0.001 0.000
Deg 0.001 0.000
Deg 0.001 0.000
Deg 0.001 0.000
Description
Operation Disabled/Enabled
Operation mode for stage 1 Off / On
Stage 1 underpower setting in Angle1
direction in % of SBase
Characteristic angle for max power
senistivity stage 1
Trip delay for stage 1
Drop-off delay for stage 1
Operation mode for stage 2 Off / On
Power setting for stage 2 in % of SBase
Characteristic angle for max power
senistivity stage 2
Trip delay for stage 2
Drop-off delay for stage 2
Description
Low pass filter coefficient for power
measurement, P and Q
Absolute hysteresis of stage 1 in % SBase
Absolute hysteresis of stage 2 in % SBase
Amplitude correction compensates current
error at 5% of Ir
Amplitude correction compensates current
error at 30% of Ir
Amplitude correction compensates current
error at 100% of Ir
Amplitude correction compensates
voltage error at 5% of Ur
Amplitude correction compensates
voltage error at 30% of Ur
Amplitude correction compensates
voltage error at 100% of Ur
Corr of error betw current and voltage
angles at 5% of Ir
Corr of error betw current and voltage
angles at 30% of Ir
Corr of error betw current and voltage
angles at 100% of Ir
Section 8
Current protection
PID-3709-SETTINGS v5
545